An entirely new class of compressor
Our D-series compressor/expander is a radial piston machine with hydraulic transmission at its core and ultra-fast gas valves controlled by an embedded computer.
It is an entirely new class of compressor, with two unique aspects.
Firstly, our patented piston arrangement offers oil-free compression up to 200 bar and a temperature lift of 200°C in a single stage. This radically reduces the capital cost of the heat pump.
Secondly, ultra-fast valves allow each cylinder to compress, expand, or be disabled on a revolution by revolution basis, offering unprecedented levels of controllability and efficiency.
This allows for energy to be recovered from the working fluid instead of wasting it through throttling – radically improving the coefficient of performance (COP).
This transforms the economics of heat pumps for industry and can deliver a payback in as little as three years, without subsidy, depending on the application.
We believe there is no other equivalent technology in this temperature and power range.
Key features
Nominal duty
Up to 2500 kg/hr evaporation rates
1.5 MWth per module
Heat source
Exhaust or ambient air
Footprint
2m x 5m per module
Market readiness
Proven market-beating performance of commercial scale model
Output temperature
Up to 300°C air
Heat source temperature range
-20°C to 100°C
Refrigerant
CO2 (R744) non-flammable, non-toxic, ultra-low GWP

Unique compressor/expander
Avoids throttling when refrigerant returns to the compressor – increased COP.

Modular design
Readily scaled from 1.5 MWth – doubling capacity without doubling capex.

Up to 200°C in a single lift
Single machine, avoids cascade, reduces capex.

Reduced cost
75% lower electricity cost versus direct electric heating
Hot, cold, or anywhere in between
The D-series is efficient at all temperatures when working as either a compressor or expander, unlocking higher COP in high temperature heat pump applications.
Very high temperature heat pump applications where the return temperature of the sink stays high have considerable energy remaining in the gas before its expansion. Throttling this gas impacts the coefficient of performance (COP) of the heat pump too much for the solution be viable.
By replacing the throttling device in a heat pump with an expander machine, it is possible to recover large amounts of energy from the return gas stream and improve COP.

See DryHeat in action
At our R&D facility
Media
Find out more about our technology



Any questions?
SynchroStor are redefining how industries manage process heat. Get in touch to find out more.
